CARMOF | CARMOF: New process for efficient CO2 capture by innovative adsorbents based on modified carbon nanotubes and MOF materials

Summary
CO2 capture process represents typically about 70% of the total cost of the CCS chain. Power plants that capture CO2 today use an old technology whereby flue gases are bubbled through organic amines in water, where the CO2 binds to amines. The liquid is then heated to 120-150ºC to release the gas, after which the liquids are reused. The entire process is expensive and inefficient: it consumes about 30 percent of the power generated.
One of the most promising technologies for CO2 capture is based on the adsorption process using solid sorbents, with the most important advantage being the potential energy penalty reduction for regeneration of the material compared to liquid absorption . Nevertheless, the challenge in this application remains the same, namely to intensify the production of a CO2 stream in terms of adsorption/desorption rates and energy use while preserving the textural characteristics of the sorbents. The key objectives of the CARMOF project are (1) to build a full demonstrator of a new energy and cost-competitive dry separation process for post-combustion CO2 capture based on hybrid porous Metal organic frameworks (MOFs) & Carbon Nanotubes (CNTs) (2) to design customized, high packed density & low pressure drop structures based on 3D printing technologies containing hybrid MOF/CNT to be used in CO2 capture system based on fluidized beds. The morphology of the printed absorber will be designed for the specific gas composition of each of the selected industries (ceramic, petrol products and steel) and (3) to optimize the CO2 desorption process by means of Joule effect combined with a vacuum temperature swing adsorption (VTSA)/membrane technology that will surpass the efficiency of the conventional heating procedures
Unfold all
/
Fold all
More information & hyperlinks
Web resources: https://cordis.europa.eu/project/id/760884
Start date: 01-01-2018
End date: 30-09-2022
Total budget - Public funding: 7 440 055,00 Euro - 5 993 227,00 Euro
Cordis data

Original description

CO2 capture process represents typically about 70% of the total cost of the CCS chain. Power plants that capture CO2 today use an old technology whereby flue gases are bubbled through organic amines in water, where the CO2 binds to amines. The liquid is then heated to 120-150ºC to release the gas, after which the liquids are reused. The entire process is expensive and inefficient: it consumes about 30 percent of the power generated.
One of the most promising technologies for CO2 capture is based on the adsorption process using solid sorbents, with the most important advantage being the potential energy penalty reduction for regeneration of the material compared to liquid absorption . Nevertheless, the challenge in this application remains the same, namely to intensify the production of a CO2 stream in terms of adsorption/desorption rates and energy use while preserving the textural characteristics of the sorbents. The key objectives of the CARMOF project are (1) to build a full demonstrator of a new energy and cost-competitive dry separation process for post-combustion CO2 capture based on hybrid porous Metal organic frameworks (MOFs) & Carbon Nanotubes (CNTs) (2) to design customized, high packed density & low pressure drop structures based on 3D printing technologies containing hybrid MOF/CNT to be used in CO2 capture system based on fluidized beds. The morphology of the printed absorber will be designed for the specific gas composition of each of the selected industries (ceramic, petrol products and steel) and (3) to optimize the CO2 desorption process by means of Joule effect combined with a vacuum temperature/preassure swing adsorption (VTSA or VPSA)/membrane technology that will surpass the efficiency of the conventional heating procedures

Status

CLOSED

Call topic

NMBP-20-2017

Update Date

27-10-2022
Images
No images available.
Geographical location(s)
Structured mapping
Unfold all
/
Fold all
Horizon 2020
H2020-EU.2. INDUSTRIAL LEADERSHIP
H2020-EU.2.1. INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies
H2020-EU.2.1.2. INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies – Nanotechnologies
H2020-EU.2.1.2.0. INDUSTRIAL LEADERSHIP - Nanotechnologies - Cross-cutting call topics
H2020-NMBP-2017-two-stage
NMBP-20-2017 High-performance materials for optimizing carbon dioxide capture
H2020-EU.2.1.3. INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced materials
H2020-EU.2.1.3.0. Cross-cutting call topics
H2020-NMBP-2017-two-stage
NMBP-20-2017 High-performance materials for optimizing carbon dioxide capture