Summary
The aim of the RETRAINER proposal is to tune and validate advanced, robot-based technologies to facilitate recovery of arm and hand function in stroke survivors and to verify extensively the use of the system by end-users. RETRAINER will allow the users to use their own arm and hand as much and as soon as possible after the trauma so to achieve the best outcomes in rehabilitation. A continuous iterative process between the technology development and the testing feedback will drive the whole project. RETRAINER will implement a full technology transfer from the results of a previous FP7 project, MUNDUS, aimed at setting up a similar assistive device for severely disabled people in daily life activities.
RETRAINER will make available two systems that could be used either combined or stand-alone. RETRAINER S1 will provide the end-user with a robot that does not completely take over the user’s tasks and substitute the functionality of the body, but specifically supports the user only whenever he/she really needs support. Residual functionality is trained and improved on rather than replaced by the robotic device. Arm movements will be supported by the combined action of a passive exoskeleton for weight relief and Neuromuscular Electrical stimulation (NMES) delivered to several arm muscles in a controlled manner. RETRAINER S2 will exploit a wearable NMES system with multiple arrays of electrodes for hand rehabilitation facilitating the grasping function. Both systems will benefit from use of interactive objects, i.e. daily-life objects able to supply information about themselves to drive usage. Within RETRAINER the same principle and module will be exploited to drive rehabilitation exercises and to monitor daily life.
The systems will undergo a thorough randomized control clinical trial with end users to assess their efficacy in rehabilitation. Certification and qualification of the system will be pursued, given the adequate quality of experimental results.
RETRAINER will make available two systems that could be used either combined or stand-alone. RETRAINER S1 will provide the end-user with a robot that does not completely take over the user’s tasks and substitute the functionality of the body, but specifically supports the user only whenever he/she really needs support. Residual functionality is trained and improved on rather than replaced by the robotic device. Arm movements will be supported by the combined action of a passive exoskeleton for weight relief and Neuromuscular Electrical stimulation (NMES) delivered to several arm muscles in a controlled manner. RETRAINER S2 will exploit a wearable NMES system with multiple arrays of electrodes for hand rehabilitation facilitating the grasping function. Both systems will benefit from use of interactive objects, i.e. daily-life objects able to supply information about themselves to drive usage. Within RETRAINER the same principle and module will be exploited to drive rehabilitation exercises and to monitor daily life.
The systems will undergo a thorough randomized control clinical trial with end users to assess their efficacy in rehabilitation. Certification and qualification of the system will be pursued, given the adequate quality of experimental results.
Unfold all
/
Fold all
More information & hyperlinks
| Web resources: | https://cordis.europa.eu/project/id/644721 |
| Start date: | 01-01-2015 |
| End date: | 31-03-2019 |
| Total budget - Public funding: | 3 711 964,11 Euro - 2 784 831,00 Euro |
Cordis data
Original description
The aim of the RETRAINER proposal is to tune and validate advanced, robot-based technologies to facilitate recovery of arm and hand function in stroke survivors and to verify extensively the use of the system by end-users. RETRAINER will allow the users to use their own arm and hand as much and as soon as possible after the trauma so to achieve the best outcomes in rehabilitation. A continuous iterative process between the technology development and the testing feedback will drive the whole project. RETRAINER will implement a full technology transfer from the results of a previous FP7 project, MUNDUS, aimed at setting up a similar assistive device for severely disabled people in daily life activities.RETRAINER will make available two systems that could be used either combined or stand-alone. RETRAINER S1 will provide the end-user with a robot that does not completely take over the user’s tasks and substitute the functionality of the body, but specifically supports the user only whenever he/she really needs support. Residual functionality is trained and improved on rather than replaced by the robotic device. Arm movements will be supported by the combined action of a passive exoskeleton for weight relief and Neuromuscular Electrical stimulation (NMES) delivered to several arm muscles in a controlled manner. RETRAINER S2 will exploit a wearable NMES system with multiple arrays of electrodes for hand rehabilitation facilitating the grasping function. Both systems will benefit from use of interactive objects, i.e. daily-life objects able to supply information about themselves to drive usage. Within RETRAINER the same principle and module will be exploited to drive rehabilitation exercises and to monitor daily life.
The systems will undergo a thorough randomized control clinical trial with end users to assess their efficacy in rehabilitation. Certification and qualification of the system will be pursued, given the adequate quality of experimental results.
Status
CLOSEDCall topic
ICT-23-2014Update Date
27-10-2022
Images
No images available.
Geographical location(s)
Structured mapping
Unfold all
/
Fold all
Search
Organisations
-
| AB.ACUS SRL (Coördinator)
-
| ASKLEPIOS KLINIK ALSBACH GMBH
-
| CONGREGAZIONE DELLE SUORE INFERMIERE DELL ADDOLORATA
-
| ECOLE POLYTECHNIQUE FEDERALE DE LAUSANNE (EPFL)
-
| HASOMED HARD-UND SOFTWARE FUER MEDIZIN GESELLSCHAFT MBH
-
| NSTIM SERVICES GMBH
-
| OTTO BOCK HEALTHCARE PRODUCTS GMBH
-
| Politecnico di Milano
-
| TECHNISCHE UNIVERSITAET WIEN
-
| TECHNISCHE UNIVERSITAT BERLIN