Summary
WASTE2WATTS (W2W) will design and engineer an integrated biogas-Solid Oxide Fuel Cell combined heat and power system with minimal gas pre-processing, focusing on low-cost biogas pollutant removal and optimal thermal system integration. Eleven partners from 4 leading biogas countries join efforts to these objectives: 2 biogas cleaning SMEs, 3 SOFC manufacturing SMEs, a biogas expert SME and 5 leading research and education centres in SOFC characterisation and modelling, and in biogas use as a fuel. Two cleaning approaches and hardware will be developed: one for small scale units (5-50 kWe), where a huge unutilised biogas potential resides (millions of farms, bio-wastes from municipalities) - here sulphur compounds (H2S and organic S) are removed by an appropriate solid sorbent matrix; one for medium-to-large scale units (≥500 kWe), which is the existing scale of landfill biogas and large bio-waste collection schemes - here sulphur compounds and siloxanes are removed among others by a novel cooling approach. For both cases the hardware will be built and installed on real biogas-sites treating different wastes. Gas analytics will validate the approaches. A 6 kWe SOFC system from a partner will run on a real agro-biogas site connected to the small scale sorbents cleaning unit. Cost projections for high volume production for both the cleaning and SOFC systems will be conducted. A detailed full system model will be implemented, considering the biogas feedstock, composition fluctuations (and dilution) and pollutant signatures, and optimizing thermal integration with biogas-inherent CO2 (for dry-dominant reforming) and digester heating, with the targets to maximise net electrical efficiency and minimise cost. An Advisory Board consisting of biogas producing SMEs will accompany the project to facilitate market access and support the post-project multiplication of the developed solutions.
Unfold all
/
Fold all
More information & hyperlinks
Web resources: | https://cordis.europa.eu/project/id/826234 |
Start date: | 01-01-2019 |
End date: | 30-09-2023 |
Total budget - Public funding: | 1 681 602,00 Euro - 1 681 602,00 Euro |
Cordis data
Original description
WASTE2WATTS (W2W) will design and engineer an integrated biogas-Solid Oxide Fuel Cell combined heat and power system with minimal gas pre-processing, focusing on low-cost biogas pollutant removal and optimal thermal system integration. Eleven partners from 4 leading biogas countries join efforts to these objectives: 2 biogas cleaning SMEs, 3 SOFC manufacturing SMEs, a biogas expert SME and 5 leading research and education centres in SOFC characterisation and modelling, and in biogas use as a fuel. Two cleaning approaches and hardware will be developed: one for small scale units (5-50 kWe), where a huge unutilised biogas potential resides (millions of farms, bio-wastes from municipalities) - here sulphur compounds (H2S and organic S) are removed by an appropriate solid sorbent matrix; one for medium-to-large scale units (≥500 kWe), which is the existing scale of landfill biogas and large bio-waste collection schemes - here sulphur compounds and siloxanes are removed among others by a novel cooling approach. For both cases the hardware will be built and installed on real biogas-sites treating different wastes. Gas analytics will validate the approaches. A 6 kWe SOFC system from a partner will run on a real agro-biogas site connected to the small scale sorbents cleaning unit. Cost projections for high volume production for both the cleaning and SOFC systems will be conducted. A detailed full system model will be implemented, considering the biogas feedstock, composition fluctuations (and dilution) and pollutant signatures, and optimizing thermal integration with biogas-inherent CO2 (for dry-dominant reforming) and digester heating, with the targets to maximise net electrical efficiency and minimise cost. An Advisory Board consisting of biogas producing SMEs will accompany the project to facilitate market access and support the post-project multiplication of the developed solutions.Status
SIGNEDCall topic
FCH-02-7-2018Update Date
26-10-2022
Images
No images available.
Geographical location(s)
Structured mapping
Unfold all
/
Fold all
H2020-EU.3.3.8.1. Increase the electrical efficiency and the durability of the different fuel cells used for power production to levels which can compete with conventional technologies, while reducing costs