Summary
A Solid Oxide Fuel Cell (SOFC) is a ceramic-based multilayer device that involves expensive and time-consuming multi-step manufacturing processes including tape casting, screen printing, firing, shaping and several high-temperature thermal treatments. In addition, these cells are manually assembled into stacks resulting in extra steps for joining and sealing that difficult the standardization and quality control of the final product while introducing weak parts likely to fail. Since current ceramics processing presents strong limitations in shape and extremely complex design for manufacturing (more than 100 steps), industrially fabricated SOFC cells and stacks are expensive and present low flexibility and long time to market. This is particularly relevant for the commercial segment of the stationary fuel cells market (5-400kW) that is highly heterogeneous in terms of the overall power and heat requirements and requires customization of the final product.
The main goal of the Cell3Ditor project is to develop a 3D printing technology for the industrial production of SOFC stacks by covering research and innovation in all the stages of the industrial value chain (inks formulation, 3D printer development, ceramics consolidation and system integration). All-ceramic joint-free SOFC stacks with embedded fluidics and current collection will be fabricated in a two-step process (single-step printing and sintering) to reduce in energy, materials and assembly costs while simplifying the design for manufacturing and time to market.
Compared to traditional ceramic processing, the Cell3Ditor manufacturing process presents a significantly shorter time to market (from years to months) and a cost reduction estimated in 63% with an initial investment below one third of an equivalent conventional manufacturing plant (production of 1000 units per year). The project is product-driven and involves SMEs (with proved technologies) in the entire value chain to ensure reaching TRL>6.
The main goal of the Cell3Ditor project is to develop a 3D printing technology for the industrial production of SOFC stacks by covering research and innovation in all the stages of the industrial value chain (inks formulation, 3D printer development, ceramics consolidation and system integration). All-ceramic joint-free SOFC stacks with embedded fluidics and current collection will be fabricated in a two-step process (single-step printing and sintering) to reduce in energy, materials and assembly costs while simplifying the design for manufacturing and time to market.
Compared to traditional ceramic processing, the Cell3Ditor manufacturing process presents a significantly shorter time to market (from years to months) and a cost reduction estimated in 63% with an initial investment below one third of an equivalent conventional manufacturing plant (production of 1000 units per year). The project is product-driven and involves SMEs (with proved technologies) in the entire value chain to ensure reaching TRL>6.
Unfold all
/
Fold all
More information & hyperlinks
| Web resources: | https://cordis.europa.eu/project/id/700266 |
| Start date: | 01-07-2016 |
| End date: | 30-04-2020 |
| Total budget - Public funding: | 2 191 133,75 Euro - 2 180 662,00 Euro |
Cordis data
Original description
A Solid Oxide Fuel Cell (SOFC) is a ceramic-based multilayer device that involves expensive and time-consuming multi-step manufacturing processes including tape casting, screen printing, firing, shaping and several high-temperature thermal treatments. In addition, these cells are manually assembled into stacks resulting in extra steps for joining and sealing that difficult the standardization and quality control of the final product while introducing weak parts likely to fail. Since current ceramics processing presents strong limitations in shape and extremely complex design for manufacturing (more than 100 steps), industrially fabricated SOFC cells and stacks are expensive and present low flexibility and long time to market. This is particularly relevant for the commercial segment of the stationary fuel cells market (5-400kW) that is highly heterogeneous in terms of the overall power and heat requirements and requires customization of the final product.The main goal of the Cell3Ditor project is to develop a 3D printing technology for the industrial production of SOFC stacks by covering research and innovation in all the stages of the industrial value chain (inks formulation, 3D printer development, ceramics consolidation and system integration). All-ceramic joint-free SOFC stacks with embedded fluidics and current collection will be fabricated in a two-step process (single-step printing and sintering) to reduce in energy, materials and assembly costs while simplifying the design for manufacturing and time to market.
Compared to traditional ceramic processing, the Cell3Ditor manufacturing process presents a significantly shorter time to market (from years to months) and a cost reduction estimated in 63% with an initial investment below one third of an equivalent conventional manufacturing plant (production of 1000 units per year). The project is product-driven and involves SMEs (with proved technologies) in the entire value chain to ensure reaching TRL>6.
Status
CLOSEDCall topic
FCH-02.6-2015Update Date
26-10-2022
Images
No images available.
Geographical location(s)
Structured mapping
Unfold all
/
Fold all
H2020-EU.3.3.8.1. Increase the electrical efficiency and the durability of the different fuel cells used for power production to levels which can compete with conventional technologies, while reducing costs
