Summary
Fully answering the requirements of topic JTI-CS2-2018-CfP09-LPA-01-59, the ASTORIA project aims at developing a demonstrated set of tools and methodologies in order to design and test devices replicating complex, steady and unsteady, total pressure and swirl combined distortion profiles with high fidelity in a test rig environment. Software and methodologies will be developed that will enable the definition of tailored multi-component devices, based on extensive exploitation of CFD, reduced-order models and optimization, harnessing the potential offered by rapid prototyping. Steady and unsteady patterns design methodologies will be validated through extensive experimental reduced-scale testing in precisely controlled conditions.
The software toolset will be highly modular and flexible. The objective is to combine into a new multi-component distortion generator generic total pressure distortion generating screens and aerodynamic turning vanes assemblies, with limitless possibilities in vane shapes, distribution and size for complex swirl pattern replication. Several assembly solutions are envisaged, which will allow to jointly rotate parts (swirl frame and base distortion) or, conversely, preserve a fixed baseline steady distortion pattern and limit periodic position variation to a subset of turning vanes and/or screen. The integrated toolset will provide an unprecedented capability for combined arbitrarily complex total pressure and swirl distortion simulation, including the minimization of the undesirable influence of the device and directly integrating mechanical and manufacturability into the design intent. It will also seamlessly allow to integrate the potential effect of the fan.
ASTORIA is specifically linked with LPA-IADP-WP1.1.3.6, will directly be applicable for specific fan designs to be tested within the SA²FIR rig and will serve the “DX2 Boundary Layer Ingestion” demonstrator, paving the way for new robust integrated engine/airframe design practices.
The software toolset will be highly modular and flexible. The objective is to combine into a new multi-component distortion generator generic total pressure distortion generating screens and aerodynamic turning vanes assemblies, with limitless possibilities in vane shapes, distribution and size for complex swirl pattern replication. Several assembly solutions are envisaged, which will allow to jointly rotate parts (swirl frame and base distortion) or, conversely, preserve a fixed baseline steady distortion pattern and limit periodic position variation to a subset of turning vanes and/or screen. The integrated toolset will provide an unprecedented capability for combined arbitrarily complex total pressure and swirl distortion simulation, including the minimization of the undesirable influence of the device and directly integrating mechanical and manufacturability into the design intent. It will also seamlessly allow to integrate the potential effect of the fan.
ASTORIA is specifically linked with LPA-IADP-WP1.1.3.6, will directly be applicable for specific fan designs to be tested within the SA²FIR rig and will serve the “DX2 Boundary Layer Ingestion” demonstrator, paving the way for new robust integrated engine/airframe design practices.
Unfold all
/
Fold all
More information & hyperlinks
Web resources: | https://cordis.europa.eu/project/id/864831 |
Start date: | 01-10-2019 |
End date: | 31-08-2023 |
Total budget - Public funding: | 2 378 125,00 Euro - 2 200 000,00 Euro |
Cordis data
Original description
Fully answering the requirements of topic JTI-CS2-2018-CfP09-LPA-01-59, the ASTORIA project aims at developing a demonstrated set of tools and methodologies in order to design and test devices replicating complex, steady and unsteady, total pressure and swirl combined distortion profiles with high fidelity in a test rig environment. Software and methodologies will be developed that will enable the definition of tailored multi-component devices, based on extensive exploitation of CFD, reduced-order models and optimization, harnessing the potential offered by rapid prototyping. Steady and unsteady patterns design methodologies will be validated through extensive experimental reduced-scale testing in precisely controlled conditions.The software toolset will be highly modular and flexible. The objective is to combine into a new multi-component distortion generator generic total pressure distortion generating screens and aerodynamic turning vanes assemblies, with limitless possibilities in vane shapes, distribution and size for complex swirl pattern replication. Several assembly solutions are envisaged, which will allow to jointly rotate parts (swirl frame and base distortion) or, conversely, preserve a fixed baseline steady distortion pattern and limit periodic position variation to a subset of turning vanes and/or screen. The integrated toolset will provide an unprecedented capability for combined arbitrarily complex total pressure and swirl distortion simulation, including the minimization of the undesirable influence of the device and directly integrating mechanical and manufacturability into the design intent. It will also seamlessly allow to integrate the potential effect of the fan.
ASTORIA is specifically linked with LPA-IADP-WP1.1.3.6, will directly be applicable for specific fan designs to be tested within the SA²FIR rig and will serve the “DX2 Boundary Layer Ingestion” demonstrator, paving the way for new robust integrated engine/airframe design practices.
Status
CLOSEDCall topic
JTI-CS2-2018-CfP09-LPA-01-59Update Date
26-10-2022
Images
No images available.
Geographical location(s)
Structured mapping
Unfold all
/
Fold all