Summary
The objective of the project is to get a complete set of assembly and maintenance tooling, including auxiliary tooling. Due to the tight tolerances required in aeronautical industry, Some assembly jigs will be equipped with an optical structured light measure system that will allow the set up of the tooling and the position verification of the parts during assembly with tolerances equal or under 0.1 mm. The use of this kind of systems are spearhead in the field of precision measurement and the advantages against currently measurement systems, as laser tracker, will be shown in following paragraphs. In addition, optical systems are becoming the preferred measurement systems in automatized assembly jigs which will be the step forward in the aeronautical assembly lines.
Unfold all
/
Fold all
More information & hyperlinks
| Web resources: | https://cordis.europa.eu/project/id/785355 |
| Start date: | 01-03-2018 |
| End date: | 28-02-2022 |
| Total budget - Public funding: | 712 500,00 Euro - 498 750,00 Euro |
Cordis data
Original description
The objective of the project is to get a complete set of assembly and maintenance tooling, including auxiliary tooling. Due to the tight tolerances required in aeronautical industry, Some assembly jigs will be equipped with an optical structured light measure system that will allow the set up of the tooling and the position verification of the parts during assembly with tolerances equal or under 0.1 mm. The use of this kind of systems are spearhead in the field of precision measurement and the advantages against currently measurement systems, as laser tracker, will be shown in following paragraphs. In addition, optical systems are becoming the preferred measurement systems in automatized assembly jigs which will be the step forward in the aeronautical assembly lines.Status
TERMINATEDCall topic
JTI-CS2-2017-CFP06-FRC-02-26Update Date
27-10-2022
Images
No images available.
Geographical location(s)
Structured mapping
Unfold all
/
Fold all
