The cerAMfacturing project will develop a completely new approach for ceramic multi material additive manufacturing which will allow series production of customised and multifunctional components for manifold applications for obtaining property combinations, like electrical conductive/electrical insulating, dense/porous or two-colored components. In five case studies demonstrators for personalized medical products – micro surgical tools, implants, and remedies – such as consumer products will be manufactured starting with the patient specific physical dimensions and ending with components validated under practically relevant conditions.
For achieving these goals manifold tasks will be solved starting with method and device development. Especially suspension based additive manufacturing methods will be developed and qualified in cerAMfacturing, because this route promises a much better component performance in comparison to powder based methods. Multi material applications play a dominant role in the project. Beside ceramic/ceramic also ceramic/metal material combinations will be developed.
For that purpose either additive manufacturing methods will be qualified or AM methods will be combined with conventional shaping routes like tape casting or ceramic injection moulding. The last mentioned combination of technologies will allow the individualisation of large series production components. Appropriate control methodologies to guarantee a high quality level of the custom made products will be implemented. The cerAMfacturing project will provide the technical equipment for combining AM steps with conventional ceramic shaping routes.
| Web resources: | https://cordis.europa.eu/project/id/678503 |
| Start date: | 10-01-2015 |
| End date: | 30-09-2018 |
| Total budget - Public funding: | 5 121 800,00 Euro - 5 121 800,00 Euro |
EFFRA Innovation Portal
Original description
The cerAMfacturing project will develop a completely new approach for ceramic multi material additive manufacturing which will allow series production of customised and multifunctional components for manifold applications for obtaining property combinations, like electrical conductive/electrical insulating, dense/porous or two-colored components. In five case studies demonstrators for personalized medical products – micro surgical tools, implants, and remedies – such as consumer products will be manufactured starting with the patient specific physical dimensions and ending with components validated under practically relevant conditions. For achieving these goals manifold tasks will be solved starting with method and device development. Especially suspension based additive manufacturing methods will be developed and qualified in cerAMfacturing, because this route promises a much better component performance in comparison to powder based methods. Multi material applications play a dominant role in the project. Beside ceramic/ceramic also ceramic/metal material combinations will be developed. For that purpose either additive manufacturing methods will be qualified or AM methods will be combined with conventional shaping routes like tape casting or ceramic injection moulding. The last mentioned combination of technologies will allow the individualisation of large series production components. Appropriate control methodologies to guarantee a high quality level of the custom made products will be implemented. The cerAMfacturing project will provide the technical equipment for combining AM steps with conventional ceramic shaping routes.Status
CLOSEDCall topic
FoF-10-2015Update Date
27-10-2022
-
| FRAUNHOFER GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V. (Coördinator)
-
| ADMATEC EUROPE BV
-
| CERAMIX IRELAND LTD
-
| CERAMTEC GMBH
-
| EUROGRANT GMBH
-
| EYE-D APS
-
| EYE-D INNOVATION APS
-
| Fraunhofer IKTS
-
| HAGE SONDERMASCHINENBAU GMBH & CO KG
-
| INMATEC TECHNOLOGIES GMBH
-
| MONTANUNIVERSITAET LEOBEN