SSTAR | Innovative HV Solid-State TrAnsformer for maximizing Renewable energy penetration in energy distribution and transmission systems

Summary
The on-going energy transition towards a decarbonized economy is changing profoundly the infrastructure of the power grids worldwide. Conventional high-power transformers are not fully prepared to overcome these challenges, as they do not have intrinsic capabilities regarding active system support. Instead, Solid-state Transformers (SSTs) have emerged in the last years as a disruptive technology able to extend the typical functionalities of a regular transformer, optimizing the power flows and introducing a high degree of digitalization and intelligence in the network. However, SSTs are not still a mature technology and only prototypes of up to 15 kV and 15 modules have been developed in the range of high frequency (40 kHz) so far. Therefore, their use is currently restricted to low-voltage applications. In this context, SSTAR aims to increase the operation voltage level of SSTs to enlarge their applications within the energy power sector while improving its performance in a reliable, cost-optimized and sustainable way. To do so, three main R&I Lines will be developed: 1) Sustainable biobased dielectric fluid able to increase the SST modules insulation voltage while achieving up to 50% of CO2 saving comparing to traditional oils 2) New SST module based on SiC with a bidirectional Inductive Power Transfer (IPT) system able to increase the individual voltage and switching frequency of SST modules up to 1.5 kV and 50kHz respectively with a total efficiency of 98.5% and 3) Decentralized control cascade H-bridge (CHB) converter to scale-up the number of modules in a single SST device to achieve the voltage levels of transmission grids. The combined effect of these innovations will be validated at TRL 4 in two certified test-beds in Spain and Portugal. Hence, SSTAR seeks to pave the way for the development of new disruptive HV SST devices more attractive for commercial purposes than the prototypes made so far, and able to be used in distribution and transmissions grids.
Unfold all
/
Fold all
More information & hyperlinks
Web resources: https://cordis.europa.eu/project/id/101069702
Start date: 01-05-2022
End date: 31-10-2025
Total budget - Public funding: 2 499 437,50 Euro - 2 499 437,00 Euro
Cordis data

Original description

The on-going energy transition towards a decarbonized economy is changing profoundly the infrastructure of the power grids worldwide. Conventional high-power transformers are not fully prepared to overcome these challenges, as they do not have intrinsic capabilities regarding active system support. Instead, Solid-state Transformers (SSTs) have emerged in the last years as a disruptive technology able to extend the typical functionalities of a regular transformer, optimizing the power flows and introducing a high degree of digitalization and intelligence in the network. However, SSTs are not still a mature technology and only prototypes of up to 15 kV and 15 modules have been developed in the range of high frequency (40 kHz) so far. Therefore, their use is currently restricted to low-voltage applications. In this context, SSTAR aims to increase the operation voltage level of SSTs to enlarge their applications within the energy power sector while improving its performance in a reliable, cost-optimized and sustainable way. To do so, three main R&I Lines will be developed: 1) Sustainable biobased dielectric fluid able to increase the SST modules insulation voltage while achieving up to 50% of CO2 saving comparing to traditional oils 2) New SST module based on SiC with a bidirectional Inductive Power Transfer (IPT) system able to increase the individual voltage and switching frequency of SST modules up to 1.5 kV and 50kHz respectively with a total efficiency of 98.5% and 3) Decentralized control cascade H-bridge (CHB) converter to scale-up the number of modules in a single SST device to achieve the voltage levels of transmission grids. The combined effect of these innovations will be validated at TRL 4 in two certified test-beds in Spain and Portugal. Hence, SSTAR seeks to pave the way for the development of new disruptive HV SST devices more attractive for commercial purposes than the prototypes made so far, and able to be used in distribution and transmissions grids.

Status

SIGNED

Call topic

HORIZON-CL5-2021-D2-01-08

Update Date

09-02-2023
Images
No images available.
Geographical location(s)
Structured mapping
Unfold all
/
Fold all
Horizon Europe
HORIZON.2 Global Challenges and European Industrial Competitiveness
HORIZON.2.5 Climate, Energy and Mobility
HORIZON.2.5.1 Climate Science and Solutions
HORIZON-CL5-2021-D2-01
HORIZON-CL5-2021-D2-01-08 Emerging technologies for a climate neutral Europe