Summary
Additive manufacturing and Automated Fibre Placement (AFP) processes brought to the emergence of a new class of fibre-reinforced materials; namely, the Variable Angle Tow (VAT) composites. AFP machines allow the fibres to be relaxed along curvilinear paths within the lamina, thus implying a point-wise variation of the material properties. In theory, the designer can conceive VAT structures with unexplored capabilities and tailor materials with optimized stiffness-to-weight ratios. In practise, steering brittle fibres, generally made of glass or carbon, is not trivial. Printing must be performed at the right combination of temperature, velocity, curvature radii and pressure to preserve the integrity of fibres. The lack of information on how the effect of these parameters propagates through the scales, from fibres to the final structure, represents the missing piece in the puzzle of VAT composites, which today are either costly or difficult to design because affected by unpredictable failure mechanisms and unwanted defects (gaps, overlaps, and fibre kinking).
This proposal is for an exploratory study into a radical new approach to the problem of design, manufacturing and analysis of tow-steered printed composite materials. The program will act as a pre-echo, a precursor, to: 1) implement global/local models for the simulation and analysis of VATs with unprecedented accuracy from fibre-matrix to component scales; 2) develop a (hybrid) metamodeling platform based on machine learning for defect sensitivity and optimization; and 3) set new rules and best-practices to design for manufacturing. A 5-year, highly inter-disciplinary programme is planned, encompassing structural mechanics, numerical calculus, 3D printing and AFP, measurements and testing of advanced composites, data science and artificial intelligence, and constrained optimization problems to finally fill the gap between the design and the digital manufacturing chain of advanced printed materials.
This proposal is for an exploratory study into a radical new approach to the problem of design, manufacturing and analysis of tow-steered printed composite materials. The program will act as a pre-echo, a precursor, to: 1) implement global/local models for the simulation and analysis of VATs with unprecedented accuracy from fibre-matrix to component scales; 2) develop a (hybrid) metamodeling platform based on machine learning for defect sensitivity and optimization; and 3) set new rules and best-practices to design for manufacturing. A 5-year, highly inter-disciplinary programme is planned, encompassing structural mechanics, numerical calculus, 3D printing and AFP, measurements and testing of advanced composites, data science and artificial intelligence, and constrained optimization problems to finally fill the gap between the design and the digital manufacturing chain of advanced printed materials.
Unfold all
/
Fold all
More information & hyperlinks
| Web resources: | https://cordis.europa.eu/project/id/850437 |
| Start date: | 01-10-2019 |
| End date: | 31-10-2025 |
| Total budget - Public funding: | 1 477 901,00 Euro - 1 477 901,00 Euro |
Cordis data
Original description
Additive manufacturing and Automated Fibre Placement (AFP) processes brought to the emergence of a new class of fibre-reinforced materials; namely, the Variable Angle Tow (VAT) composites. AFP machines allow the fibres to be relaxed along curvilinear paths within the lamina, thus implying a point-wise variation of the material properties. In theory, the designer can conceive VAT structures with unexplored capabilities and tailor materials with optimized stiffness-to-weight ratios. In practise, steering brittle fibres, generally made of glass or carbon, is not trivial. Printing must be performed at the right combination of temperature, velocity, curvature radii and pressure to preserve the integrity of fibres. The lack of information on how the effect of these parameters propagates through the scales, from fibres to the final structure, represents the missing piece in the puzzle of VAT composites, which today are either costly or difficult to design because affected by unpredictable failure mechanisms and unwanted defects (gaps, overlaps, and fibre kinking).This proposal is for an exploratory study into a radical new approach to the problem of design, manufacturing and analysis of tow-steered printed composite materials. The program will act as a pre-echo, a precursor, to: 1) implement global/local models for the simulation and analysis of VATs with unprecedented accuracy from fibre-matrix to component scales; 2) develop a (hybrid) metamodeling platform based on machine learning for defect sensitivity and optimization; and 3) set new rules and best-practices to design for manufacturing. A 5-year, highly inter-disciplinary programme is planned, encompassing structural mechanics, numerical calculus, 3D printing and AFP, measurements and testing of advanced composites, data science and artificial intelligence, and constrained optimization problems to finally fill the gap between the design and the digital manufacturing chain of advanced printed materials.
Status
SIGNEDCall topic
ERC-2019-STGUpdate Date
27-04-2024
Images
No images available.
Geographical location(s)
Structured mapping
Unfold all
/
Fold all
