MP-ORIF | Innovative biocompatible game changing material for medical implants in trauma

Summary
MMATECH was founded in 2001 to address the challenge of developing better biomaterials for medical devices in orthopaedics. We developed a new engineering modified wear-free biopolymer (MP-1™) for medical devices: dental implants and acetabular liner for hip replacement implants, proved in clinical trials and granted with CE mark. Within MP-ORIF project we will introduce to the market a new game changing Open Reduction Internal Fixation (ORIF) implant made of MP-1TM, called MP-ORIF. This new polyimide polymer will substitute the currently metal orthopaedic implants used in trauma surgery. Orthopaedic fractures are a common acute health issue. A significant increase of bone fractures is foreseen in the coming years due to population aging, more active lifestyle and traffic accidents. All standard metal internal fixator nails have predrilled holes which require a special trained doctor to locate them in the body under Xray to insert the fixation screws. In MP-ORIF the drilling will be produced in the body enabling a robust design without holes, eliminating repeated X-ray imaging which is costly and potentially dangerous. The nail can stay in the body for life-time with no pain caused by outer temperature change. We therefore predict that MP-ORIF will become the gold standard for directly-insert bone fixation in trauma. MP-ORIF will have a significant impact on various levels: (i) market/clients (hospitals, healthcare, doctors): shorter surgery time, higher success rate and an over 50 % lower cost; (ii) end-user (patients): shorter post-operation recovery, greatly reduced scarring; (iii) company: increase in MMATECH’s revenue; (iv) stakeholders: lower public healthcare costs; (v) society: developing economies may gain access to high quality trauma care otherwise impossible. Women will be the major beneficiaries from MP-ORIF project since approximately 80% of the world populations affected by osteoporosis, osteoarthritis and bone injuries are women over 50.
Unfold all
/
Fold all
More information & hyperlinks
Web resources: https://cordis.europa.eu/project/id/767901
Start date: 01-09-2017
End date: 28-02-2021
Total budget - Public funding: 1 659 693,00 Euro - 1 161 785,00 Euro
Cordis data

Original description

MMATECH was founded in 2001 to address the challenge of developing better biomaterials for medical devices in orthopaedics. We developed a new engineering modified wear-free biopolymer (MP-1™) for medical devices: dental implants and acetabular liner for hip replacement implants, proved in clinical trials and granted with CE mark. Within MP-ORIF project we will introduce to the market a new game changing Open Reduction Internal Fixation (ORIF) implant made of MP-1TM, called MP-ORIF. This new polyimide polymer will substitute the currently metal orthopaedic implants used in trauma surgery. Orthopaedic fractures are a common acute health issue. A significant increase of bone fractures is foreseen in the coming years due to population aging, more active lifestyle and traffic accidents. All standard metal internal fixator nails have predrilled holes which require a special trained doctor to locate them in the body under Xray to insert the fixation screws. In MP-ORIF the drilling will be produced in the body enabling a robust design without holes, eliminating repeated X-ray imaging which is costly and potentially dangerous. The nail can stay in the body for life-time with no pain caused by outer temperature change. We therefore predict that MP-ORIF will become the gold standard for directly-insert bone fixation in trauma. MP-ORIF will have a significant impact on various levels: (i) market/clients (hospitals, healthcare, doctors): shorter surgery time, higher success rate and an over 50 % lower cost; (ii) end-user (patients): shorter post-operation recovery, greatly reduced scarring; (iii) company: increase in MMATECH’s revenue; (iv) stakeholders: lower public healthcare costs; (v) society: developing economies may gain access to high quality trauma care otherwise impossible. Women will be the major beneficiaries from MP-ORIF project since approximately 80% of the world populations affected by osteoporosis, osteoarthritis and bone injuries are women over 50.

Status

CLOSED

Call topic

SMEInst-02-2016-2017

Update Date

27-10-2022
Images
No images available.
Geographical location(s)
Structured mapping
Unfold all
/
Fold all
Horizon 2020
H2020-EU.2. INDUSTRIAL LEADERSHIP
H2020-EU.2.1. INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies
H2020-EU.2.1.2. INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies – Nanotechnologies
H2020-EU.2.1.2.0. INDUSTRIAL LEADERSHIP - Nanotechnologies - Cross-cutting call topics
H2020-SMEINST-1-2016-2017
SMEInst-02-2016-2017 Accelerating the uptake of nanotechnologies advanced materials or advanced manufacturing and processing technologies by SMEs
H2020-SMEINST-2-2016-2017
SMEInst-02-2016-2017 Accelerating the uptake of nanotechnologies advanced materials or advanced manufacturing and processing technologies by SMEs
H2020-EU.2.1.3. INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced materials
H2020-EU.2.1.3.0. Cross-cutting call topics
H2020-SMEINST-1-2016-2017
SMEInst-02-2016-2017 Accelerating the uptake of nanotechnologies advanced materials or advanced manufacturing and processing technologies by SMEs
H2020-SMEINST-2-2016-2017
SMEInst-02-2016-2017 Accelerating the uptake of nanotechnologies advanced materials or advanced manufacturing and processing technologies by SMEs
H2020-EU.2.1.5. INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing
H2020-EU.2.1.5.0. Cross-cutting call topics
H2020-SMEINST-1-2016-2017
SMEInst-02-2016-2017 Accelerating the uptake of nanotechnologies advanced materials or advanced manufacturing and processing technologies by SMEs
H2020-SMEINST-2-2016-2017
SMEInst-02-2016-2017 Accelerating the uptake of nanotechnologies advanced materials or advanced manufacturing and processing technologies by SMEs
H2020-EU.2.3. INDUSTRIAL LEADERSHIP - Innovation In SMEs
H2020-EU.2.3.1. Mainstreaming SME support, especially through a dedicated instrument
H2020-SMEINST-1-2016-2017
SMEInst-02-2016-2017 Accelerating the uptake of nanotechnologies advanced materials or advanced manufacturing and processing technologies by SMEs
H2020-SMEINST-2-2016-2017
SMEInst-02-2016-2017 Accelerating the uptake of nanotechnologies advanced materials or advanced manufacturing and processing technologies by SMEs