Summary
Due to their high efficiencies (>25%), low-cost and compatibility with scalable, low energy demanding fabrication techniques, perovskite solar cells (PSCs) are the most promising PV technology to replace silicon. However, there are challenges towards their commercialisation, including the low operational stability, the use of expensive components (gold) and the need for expensive, high temperature/vacuum deposition equipment. These complexities increase the manufacturing cost/carbon footprint and reduce the manufacturing throughput. A promising way to overcome these challenges is by adopting the Carbon-based PSCs (CPSCs) configuration, in which the gold electrode is replaced by a low-cost printable carbon (graphite-based) conductive film. However, due to the electronic losses at the Carbon/Perovskite interface and the high sheet resistance of graphite-based Carbon electrodes (>10 Ohm/sq), the highest reported certified power conversion efficiency (PCE) for CPSC is just 12.8%. The research carried out under this proposal aims to: 1) generate the first CPSC with certified PCE > 20% and operational lifetime comparable to commercial technologies and 2) demonstrate stable CPSC modules (100cm2) with >15% PCE. This will be enabled by exploiting novel printable Graphene Nanoplate based electrodes (replacing graphite), perovskite passivation and interfacial engineering approaches. Such an outcome would be tremendously important for the EU market and will attract the attention of industry towards commercialization. The expected outcome will enable a significant reduction in the levelized cost of electricity to 0.03 €/kWh, even below the cost of traditional energy sources. Also, a significant reduction of CO2 emissions is expected, thanks to the excellent device lifetime potential and the low energy demanding fabrication processes. Therefore, the demonstration of CPSCs with the aforementioned capabilities would represent a significant scientific and technological breakthrough.
Unfold all
/
Fold all
More information & hyperlinks
| Web resources: | https://cordis.europa.eu/project/id/101024237 |
| Start date: | 01-09-2021 |
| End date: | 31-08-2023 |
| Total budget - Public funding: | 191 149,44 Euro - 191 149,00 Euro |
Cordis data
Original description
Due to their high efficiencies (>25%), low-cost and compatibility with scalable, low energy demanding fabrication techniques, perovskite solar cells (PSCs) are the most promising PV technology to replace silicon. However, there are challenges towards their commercialisation, including the low operational stability, the use of expensive components (gold) and the need for expensive, high temperature/vacuum deposition equipment. These complexities increase the manufacturing cost/carbon footprint and reduce the manufacturing throughput. A promising way to overcome these challenges is by adopting the Carbon-based PSCs (CPSCs) configuration, in which the gold electrode is replaced by a low-cost printable carbon (graphite-based) conductive film. However, due to the electronic losses at the Carbon/Perovskite interface and the high sheet resistance of graphite-based Carbon electrodes (>10 Ohm/sq), the highest reported certified power conversion efficiency (PCE) for CPSC is just 12.8%. The research carried out under this proposal aims to: 1) generate the first CPSC with certified PCE > 20% and operational lifetime comparable to commercial technologies and 2) demonstrate stable CPSC modules (100cm2) with >15% PCE. This will be enabled by exploiting novel printable Graphene Nanoplate based electrodes (replacing graphite), perovskite passivation and interfacial engineering approaches. Such an outcome would be tremendously important for the EU market and will attract the attention of industry towards commercialization. The expected outcome will enable a significant reduction in the levelized cost of electricity to 0.03 €/kWh, even below the cost of traditional energy sources. Also, a significant reduction of CO2 emissions is expected, thanks to the excellent device lifetime potential and the low energy demanding fabrication processes. Therefore, the demonstration of CPSCs with the aforementioned capabilities would represent a significant scientific and technological breakthrough.Status
TERMINATEDCall topic
MSCA-IF-2020Update Date
28-04-2024
Images
No images available.
Geographical location(s)
Search
