Home
Interesting shortcuts
Programmes and Partnerships
Search
European Partnerships
EU-Programme-Call
Projects
Projects
Resources
Resources
www.decubber.com
Login
Programmes and Partnerships
EU-Programme-Call
Horizon 2020
H2020-EU.3. SOCIETAL CHALLENGES
H2020-EU.3.4. SOCIETAL CHALLENGES - Smart, Green And Integrated Transport
H2020-EU.3.4.5. CLEANSKY2
H2020-EU.3.4.5.4. ITD Airframe
H2020-EU.3.4.5.4. ITD Airframe
Mapped projects (128)
H2020-CS2-CFP01-2014-01
(13)
JTI-CS2-2014-CFP01-AIR-01-01 Aerodynamic and acoustic capabilities developments for close coupling, high bypass ratio turbofan Aircraft integration
(1)
JTI-CS2-2014-CFP01-AIR-01-02 Advanced predictive models development and simulation capabilities for Engine design space exploration and performance optimization
(1)
JTI-CS2-2014-CFP01-AIR-01-03 CROR Engine debris Impact. Shielding design, manufacturing, simulation and Impact test preparation
(1)
JTI-CS2-2014-CFP01-AIR-01-04 Aero-acoustic experimental characterization of a CROR (Contra Rotating Open Rotor) engine WT model with core flow in propellers architecture
(1)
JTI-CS2-2014-CFP01-AIR-01-05 Blade FEM impact simulations and sample manufacturing for CROR Aircraft
(1)
JTI-CS2-2014-CFP01-AIR-01-06 Design and demonstration of a laminar nacelle concept for business jet
(1)
JTI-CS2-2014-CFP01-AIR-01-07 Eco Design for Airframe - Re-use of Thermoplastics Composites
(1)
JTI-CS2-2014-CFP01-AIR-02-01 Flightworthy Flush & Lightweight doors for unpressurized Fast Rotorcraft
(1)
JTI-CS2-2014-CFP01-AIR-02-03 Curved stiffened panels in thermoplastics by preindustrial ISC process
(1)
JTI-CS2-2014-CFP01-AIR-02-04 New enhanced acoustic damping composite material
(1)
JTI-CS2-2014-CFP01-AIR-02-05 Structural bonded repair of monolithic composite airframe
(1)
JTI-CS2-2014-CFP01-AIR-02-06 Simulation tool development for a composite manufacturing process default prediction integrated into a quality control system
(1)
JTI-CS2-2014-CFP01-AIR-02-07 Design Against Distortion: Part distortion prediction, design for minimized distortion, metallic aerospace parts
(1)
H2020-CS2-CFP02-2015-01
(15)
JTI-CS2-2015-CFP02-AIR-01-08 CROR Engine debris Middle level Impact and mechanical test
(1)
JTI-CS2-2015-CFP02-AIR-01-09 Experimental characterization of turbulent pressure fluctuations on realistic Contra-Rotating Open Rotor (CROR) 2D airfoil in representative high subsonic Mach number.
(1)
JTI-CS2-2015-CFP02-AIR-01-10 Erosion-resistant functional coatings
(1)
JTI-CS2-2015-CFP02-AIR-01-12 Tool-Part-Interaction simulation process linked to laminate quality
(1)
JTI-CS2-2015-CFP02-AIR-01-13 Complex (composite) part Ultrasonic inspection facilitated by man-robot collaboration
(1)
JTI-CS2-2015-CFP02-AIR-01-14 Technology evaluation of immersive technologies for in-flight applications
(1)
JTI-CS2-2015-CFP02-AIR-02-08 Ice protection system based on two-phase heat transport technologies integrated in representative engine intake structure
(1)
JTI-CS2-2015-CFP02-AIR-02-09 HVDC Electrical Power Conversion and Distribution System Development
(1)
JTI-CS2-2015-CFP02-AIR-02-10 Integrated airborne antenna for satellite communications in wing – fuselage airframe fairing
(1)
JTI-CS2-2015-CFP02-AIR-02-11 Ice protection technology based on electromagnetic induction integrated in representative leading edge structure
(1)
JTI-CS2-2015-CFP02-AIR-02-12 System development for optical fiber sensing technology measurements for industrial aeronautical contexts: composite manufacturing plants, structural test platforms and airborne conditions
(1)
JTI-CS2-2015-CFP02-AIR-02-13 Prototype Manufacturing Tooling for Single Parts Manufacturing of the Rotorless tail for LifeRCraft.
(1)
JTI-CS2-2015-CFP02-AIR-02-14 Prototype Tooling for Sub-Assembly, Final Assembly and Transport of the Rotorless tail for the Compound RC.
(1)
JTI-CS2-2015-CFP02-AIR-02-15 Design Against Distortion: Part distortion prediction, design for minimized distortion, carbon-epoxy aerospace parts
(1)
JTI-CS2-2015-CFP02-AIR-02-16 Process development for composite frames manufacturing with high production rate and low cost
(1)
H2020-CS2-CFP03-2016-01
(14)
JTI-CS2-2016-CFP03-AIR-01-15 Functional top coat for natural laminar flow
(1)
JTI-CS2-2016-CFP03-AIR-01-16 Design Guide Lines and Simulation Methods for Additive Manufactured Titanium Components
(1)
JTI-CS2-2016-CFP03-AIR-01-17 Orbital Drilling of small (<10mm diameter) holes, standardly spaced with aluminium material in the stack
(1)
JTI-CS2-2016-CFP03-AIR-01-18 Research and development of a compact drilling and fastening unit suitable for a range of standard 2 piece fasteners
(1)
JTI-CS2-2016-CFP03-AIR-01-19 Hybrid Aircraft Seating Requirement Specification and Design - HAIRD
(1)
JTI-CS2-2016-CFP03-AIR-02-17 Flexible Test Rig of Aircraft Control Surfaces powered by EMAs
(1)
JTI-CS2-2016-CFP03-AIR-02-18 Prototype Tooling for subcomponents manufacturing for wing winglet
(1)
JTI-CS2-2016-CFP03-AIR-02-19 Prototype Tooling for Sub-Assembly, Final Assembly and Transport of the Morphing Winglet and Multifunctional Outer Flaps of the next generation optimized wing box.
(1)
JTI-CS2-2016-CFP03-AIR-02-20 Low cost Fused Filament Fabrication of high performance thermoplastics for structural applications
(1)
JTI-CS2-2016-CFP03-AIR-02-21 Innovative Tooling Design and Manufacturing for Thermoplastic Stringers and High Integration
(1)
JTI-CS2-2016-CFP03-AIR-02-22 Adaptive multifunctional innovative Test Rigs for both structural test of multidimensional and multishape panels and structural tests on Tail unit
(1)
JTI-CS2-2016-CFP03-AIR-02-23 Automation of hand lay-up manufacturing process for composite stiffeners
(1)
JTI-CS2-2016-CFP03-AIR-02-24 Tests for leakage identification on Aircraft fluid mechanical installations
(1)
JTI-CS2-2016-CFP03-AIR-02-26 Development of innovative automated fiber placement machine for composite fuselage manufacturing with high performance hybrid materials.
(1)
H2020-CS2-CFP04-2016-02
(11)
JTI-CS2-2016-CFP04-AIR-01-21 Integrated Automated Test Bench Control System with Certifiable Test Documentation Functionality
(1)
JTI-CS2-2016-CFP04-AIR-01-23 Novel manufacture of low weight skin without chemical milling
(1)
JTI-CS2-2016-CFP04-AIR-01-24 Multi-functional cabin rest area
(1)
JTI-CS2-2016-CFP04-AIR-02-28 Development of methods for deriving optimized shapes of morphing structures considering both aerodynamic performances and specific mechanical morphing boundary conditions
(1)
JTI-CS2-2016-CFP04-AIR-02-30 Development and manufacturing of innovative stamping dies for aluminium ribs Hot Stamping
(1)
JTI-CS2-2016-CFP04-AIR-02-31 Numerical methodologies and related tools for effect of defect prediction in manufacturing
(1)
JTI-CS2-2016-CFP04-AIR-02-32 Testing matrix optimization by interaction between numerical modelling and innovative non-contact measurement technology
(1)
JTI-CS2-2016-CFP04-AIR-02-33 Developing innovative joining concepts and their manufacturing methodologies
(1)
JTI-CS2-2016-CFP04-AIR-02-34 Hardware demonstrator development and deployment on Future Industrial Human Machine Interface (HMI) and Connected factory technologies
(1)
JTI-CS2-2016-CFP04-AIR-02-36 Development of prototype system based on Laser UT technology for high speed contactless no-couplant inspection of hybrid and thick composite structures
(1)
JTI-CS2-2016-CFP04-AIR-02-37 Quilted Stratum Processes (QSP) for low cost and eco thermoplastic manufacturing of complex composite parts
(1)
H2020-CS2-CFP06-2017-01
(15)
JTI-CS2-2017-CFP06-AIR-01-25 Prediction of aerodynamic loads at high Reynolds Number
(1)
JTI-CS2-2017-CFP06-AIR-01-26 Development of innovative and optimized stiffeners run-out for overall panel weight saving of composite wing
(1)
JTI-CS2-2017-CFP06-AIR-01-27 Innovative solutions for metallic ribs or fittings introduced in a composite box to optimally deal with thermo-mechanical effects
(1)
JTI-CS2-2017-CFP06-AIR-01-28 Optimized cockpit windshields for large diameter business aircrafts
(1)
JTI-CS2-2017-CFP06-AIR-01-29 Optimisation of Friction Stir Welding (FSW) and Laser Beam Welding (LBW) for assembly of structural aircraft parts
(1)
JTI-CS2-2017-CFP06-AIR-02-39 Integration of innovative ice protection systems into structure and their validation
(1)
JTI-CS2-2017-CFP06-AIR-02-41 Integrated electronics for actuator data and power management for Morphing Leading Edge activities
(1)
JTI-CS2-2017-CFP06-AIR-02-42 Lay-up tools for net-shape AFP-manufacturing of geometrically complex helicopter sideshell sandwich-panels
(1)
JTI-CS2-2017-CFP06-AIR-02-43 Low cost optical wave guides for damage detection including analysis and aircraft data transfer related to aircraft functional needs with self-testing connection
(1)
JTI-CS2-2017-CFP06-AIR-02-44 Adjustable high loaded rod
(1)
JTI-CS2-2017-CFP06-AIR-02-45 Development and deployment of PLM Tools for A/C Ground Functional testing with Eco-design criteria.
(1)
JTI-CS2-2017-CFP06-AIR-02-46 Auto testing technologies and more automated factories for Aircraft validation test process
(1)
JTI-CS2-2017-CFP06-AIR-02-47 Part specific process optimization in SLM
(1)
JTI-CS2-2017-CFP06-AIR-02-49 Development and validation of a self-adaptive system for automated assembly of major composite aerostructures
(1)
JTI-CS2-2017-CFP06-AIR-02-50 Prototype Tooling for subcomponents manufacturing for fuselage.
(1)
H2020-CS2-CFP07-2017-02
(16)
JTI-CS2-2017-CfP07-AIR-01-30 Finalize and improve the manufacturing of the model of a laminar wing configuration bizjet (LSBJ)
(1)
JTI-CS2-2017-CfP07-AIR-01-31 Evaluation of the benefits of a laminar nacelle and a laminar HTTP installed on a bizjet configuration
(1)
JTI-CS2-2017-CfP07-AIR-01-32 Prototype Tooling for manufacturing composite stiffened panel for a business jet lower wing
(1)
JTI-CS2-2017-CfP07-AIR-01-33 Flexible RTM tool concept for composites with spring back adjustments capabilities
(1)
JTI-CS2-2017-CfP07-AIR-01-34 Development of innovative aluminium filler wire based manufacturing of aeronautic components and structures
(1)
JTI-CS2-2017-CfP07-AIR-01-35 Development of an eco-friendly selective stripping for exterior surfaces of airframe structures
(1)
JTI-CS2-2017-CfP07-AIR-01-36 Hybrid Aircraft Seating Manufacturing & Testing
(1)
JTI-CS2-2017-CfP07-AIR-02-51 Light weight, certifiable airframe structures through combination with high performance materials
(1)
JTI-CS2-2017-CfP07-AIR-02-52 Helicopter carbon composite engine deck
(1)
JTI-CS2-2017-CfP07-AIR-02-53 Innovative & Flexible pilot plant Means for highly integrated AFP infusion wing box aiming at flying demonstrator manufacturing
(1)
JTI-CS2-2017-CfP07-AIR-02-54 "Seals for FTB#2 Wing with Additive Manufacturing Technologies"
(1)
JTI-CS2-2017-CfP07-AIR-02-55 Thermal conductive coating providing self-limitation of heating power at a selected temperature level
(1)
JTI-CS2-2017-CfP07-AIR-02-56 Advanced Integrated Testing Methods development
(1)
JTI-CS2-2017-CfP07-AIR-02-57 Tests and Modelling for reliability characterization and robustness of optoelectronic transceivers for optical SHM systems
(1)
JTI-CS2-2017-CfP07-AIR-02-58 Optimization of hybrid joining (Refill Friction Stir Spot Welding + adhesive bond) for increasing mechanical properties and corrosion protection of the joints [SAT]
(1)
JTI-CS2-2017-CfP07-AIR-02-59 Breakthrough design concept solutions and technologies for Regional Aircraft Cabin Interiors innovative configuration
(1)
H2020-CS2-CFP08-2018-01
(16)
JTI-CS2-2018-CfP08-AIR-01-37 Composite mould tool based on 3D printing
(1)
JTI-CS2-2018-CfP08-AIR-01-38 Innovative test rig for the investigation of gust loads in transonic flow conditions
(1)
JTI-CS2-2018-CfP08-AIR-01-39 In-Seat Ventilation & Supply for Personalized Comfort Control on Board an Aircraft
(1)
JTI-CS2-2018-CfP08-AIR-02-60 Full Scale Innovative Integrated Tooling for Composite Material Wing Box [SAT]
(1)
JTI-CS2-2018-CfP08-AIR-02-61 Development and Optimization of Bonding Assembly Technology for a Composite Material Wingbox
(1)
JTI-CS2-2018-CfP08-AIR-02-62 Virtual-Hybrid-Real On Ground demonstration for HVDC & EMA Integration
(1)
JTI-CS2-2018-CfP08-AIR-02-63 Enhanced Low Cost Complex Composite Structures
(1)
JTI-CS2-2018-CfP08-AIR-02-64 Cold Spray of metallic coatings on polymer and composite materials [SAT]
(1)
JTI-CS2-2018-CfP08-AIR-02-65 Design of special welding head for FSW process with automatic adjustable pin and welding force control system [SAT]
(1)
JTI-CS2-2018-CfP08-AIR-02-66 Evaluation and modelling of comfort driving parameters in a Cabin Demonstrator
(1)
JTI-CS2-2018-CfP08-AIR-02-67 Model based development of an innovative ECS air distribution system for ground testing with a Cabin Demonstrator
(1)
JTI-CS2-2018-CfP08-AIR-03-01 Bio contamination survey
(1)
JTI-CS2-2018-CfP08-AIR-03-02 Non destructive testing (NDT) of bonded assemblies
(1)
JTI-CS2-2018-CfP08-AIR-03-03 Sizing for recycled carbon fibres to optimise adhesion in organic/inorganic composite materials
(1)
JTI-CS2-2018-CfP08-AIR-03-04 Development of an anaerobic digester prototype for aircraft use
(1)
JTI-CS2-2018-CfP08-AIR-03-05 Development and evaluation of a manufacturing process for a lightweight aircraft wheel made of CFRP
(1)
H2020-CS2-CFP09-2018-02
(10)
JTI-CS2-2018-CFP09-AIR-01-40 Anticontamination Coatings and Cleaning Solutions for Laminar Wings
(1)
JTI-CS2-2018-CFP09-AIR-02-68 Spring-in prediction capability for large integral wing structure [SAT]
(1)
JTI-CS2-2018-CFP09-AIR-02-69 Biphasic Heat Transport Integration for Efficient Heat Exchange within Composite materials Nacelle
(1)
JTI-CS2-2018-CFP09-AIR-02-70 Development and application of an innovative methodology devoted for high temperature characterization of high efficient composite structures
(1)
JTI-CS2-2018-CFP09-AIR-02-71 Model Manufacturing and Wind Tunnel Testing of High Lift System for SAT Aircraft
(1)
JTI-CS2-2018-CFP09-AIR-02-73 Material modelling platform for generation of thermoplastic material allowable
(1)
JTI-CS2-2018-CFP09-AIR-02-74 Development of a multipurpose test rig and validation of an innovative rotorcraft vertical tail
(1)
JTI-CS2-2018-CFP09-AIR-02-75 Design Against Distortion: Part distortion prediction, design for minimized distortion, additive manufactured polymer aerospace parts
(1)
JTI-CS2-2018-CFP09-AIR-02-76 Cost analysis software platform for evaluating innovative manufacturing technology for SMART fuselage
(1)
JTI-CS2-2018-CFP09-AIR-03-06 Calibrating Ultrasonic Sensors for atmospheric corrosion.
(1)
H2020-CS2-CFP10-2019-01
(16)
JTI-CS2-2019-CFP10-AIR-01-42 Development of a methodology (test, measurement, analysis) to characterize the behaviour of composite structures under dynamic loading
(1)
JTI-CS2-2019-CFP10-AIR-01-43 Verification of advanced simplified HLFC concept with variable porosity
(1)
JTI-CS2-2019-CFP10-AIR-01-44 Development of a methodology to optimize a wing composite panel with respect to tyre damage certification requirement
(1)
JTI-CS2-2019-CFP10-AIR-01-45 Coupon and element testing and manufacturing of test article for morphing technologies
(1)
JTI-CS2-2019-CFP10-AIR-02-77 Increasing the efficiency of pulsed jet actuators for flow separation control
(1)
JTI-CS2-2019-CFP10-AIR-02-78 Application of graphene based materials in aeronautical structures for de-icing, lightning strike protection, fire barrier and water absorption prevention purposes
(1)
JTI-CS2-2019-CFP10-AIR-02-79 Development of FEM fastener parametric/adaptable sizing tool including EMC impact, and manufacturing and EMC/LSP testing of demonstrators
(1)
JTI-CS2-2019-CFP10-AIR-02-80 Innovative flight data measurements to support the aerodynamic analysis of a compound helicopter demonstrator
(1)
JTI-CS2-2019-CFP10-AIR-02-81 Active Flow control on Tilt Rotor lifting surfaces
(1)
JTI-CS2-2019-CFP10-AIR-02-82 Innovative approaches for interior Noise Control for Next Generation Civil Tilt Rotor
(1)
JTI-CS2-2019-CFP10-AIR-02-83 Innovative weight measurement system for Tilt Rotor application
(1)
JTI-CS2-2019-CFP10-AIR-02-85 Development of a multifunctional system for complex aerostructures assembly, assisted by neural network softwares
(1)
JTI-CS2-2019-CFP10-AIR-02-86 Development of equipment for composite recycling process of uncured material
(1)
JTI-CS2-2019-CFP10-AIR-03-07 End of Life (EoL) for biomaterials
(1)
JTI-CS2-2019-CFP10-AIR-03-08 Disassembly and recycling of innovative structures made of different Al-Li alloys
(1)
JTI-CS2-2019-CFP10-AIR-03-09 Scrapping of carbon reinforced thermoplastic materials
(1)
H2020-IBA-CS2-GAMS-2017
(1)
CS2-GAM-2018-AIR Airframes
(1)
H2020-IBA-CS2-GAMS-2019
(1)
CS2-GAM-2020-AIR
(1)